The MAX7219 are compact, serial input/output common-cathode display drivers that interface microprocessors (µPs) to 7-segment numeric LED displays of up to 8 digits, bar-graph displays, or 64 individual LEDs. Included on-chip are a BCD code-B decoder, multiplex scan circuitry, segment and digit drivers, and an 8x8 static RAM that stores each digit. Only one external resistor is required to set the segment current for all LEDs.
A convenient 4-wire serial interface connects to all common µPs. Individual digits may be addressed and updated without rewriting the entire display. The MAX7219 also allow the user to select code-B decoding or no-decode for each digit.
The devices include a 150µA low-power shutdown mode, analog and digital brightness control, a scan-limit register that allows the user to display from 1 to 8 digits, and a test mode that forces all LEDs on.
- 10MHz Serial Interface
- Individual LED Segment Control
- Decode/No-Decode Digit Selection
- 150µA Low-Power Shutdown (Data Retained)
- Digital and Analog Brightness Control
- Display Blanked on Power-Up
- Drive Common-Cathode LED Display
- 24-Pin DIP and SO Packages
This is a 5V operation device. If you need to run it by the book at 3.3V Logic Level you willneed to use a level shifter.
In practice, as you will see below, you can try and run it directly, a bit out of spec.
As MAX7219 HIGH logic level is at 3.5V...well...looks like it's working quite OK also in this way, in 48 hours of continuous running no freeze or strange behaviour:)
8 цифров LED дисплей (MAX7219) червен
- Производител: China
- Код на продукта: 1109
- Наличност: 17
- 5 или повече 7.00 лв.